Spare Parts

Shale shaker motor is an essential part of mud shale shaker, usually, we choose explosion-proof vibration motor for oil and gas drilling. HYANG series outdoor flameproof vibration three-phase asynchronous motor working principle is similar to general-purpose vibration motor. It uses the high-speed rotation of eccentric blocks at both ends to generate vibration force as a vibration source.

The mud agitator is generally installed on the surface of the mixing tank, and the mixing medium is mainly solid and liquid, including mud, muddy water, oil and water and other media. The mud agitator is mainly composed of motor, reducer, base, stirring rod, impeller and other spare parts. Among them, the motor and the reducer, and the reducer and the pulsator shaft are all connected by a rigid coupling, and the pulsator is assembled by welding four blades.

Centrifugal sand pump, due to its harsh working environment and the large amount of solid particles in the conveying medium, some parts wear out quickly and need to be replaced regularly. The following are common consumable parts of centrifugal sand pump:

Tank Suction Valve (or subsea valve, bottom flow valve) is suitable for pipelines and bins of drilling mud tanks that use mud as a medium. It is used as a control valve for suction and discharge, and also serves as a switch for balance control between bins. HYANG series tank suction valve has a compact structure and reasonable design. It has accumulated years of experience and switched to valve seal, with features long service life and stable performance.

HYANG tank suction valve adopts end-sealed valve plate and rotating lifting mechanism to achieve same and isolation of tank bottom pipeline. The clutch between the valve plate and sealing seat is mainly composed of the valve body, valve stem, hand wheel, lifting rod, valve plate, bearing, and other components. Popular suction valves size are 6″, 8″, 10″, and 12″.  For detail dimension or size, they can be manufactured to suit various customers’ tank depth, suction height, suction line requirements and other special requirements

The drilling shale shaker plays a vital role in the drilling process, but due to the harsh working environment, wear and damage of some parts are inevitable. Understanding these wearing parts and taking corresponding maintenance measures is crucial to ensure the normal operation of the equipment and extend its service life.

The shale shaker parts mainly include stainless steel screen, vibration motor, tension bolt, wedge block, shock absorber spring, rubber strip, etc. Screen mesh and explosion-proof excitation motor are the most important accessories, Hyang supplies a full range of shaker screens and vibration motors. Screens mainly sup
ply original screens for Hyang shale shakers and also supply high-quality replacement screens for Derrick, Brandt, Kemtron, Swaco and so on.

Desilter cones are the main functional component of the drilling fluid desilter. The desilter is the next-level solid control equipment of the desander, that is, the third-level solid control equipment. It is mainly used to separate the solids phase particles of 20~40 μm. It is mainly composed of a desilting cyclone and a vibrating screen, with a cyclone above and a vibrating screen below.The size of the desilter cone is generally 4 inches, and the number of desilter cyclones used is 4 to 20 according to different site conditions.

Desander cyclone is an important part of desander and desilter, which is used to remove remaining cuttings larger than barite. When barite is added to drilling fluids, the bottom desilter passes through 100~325 mesh screen, thus can recover most barite and also can continuously remove drill cuttings larger than mesh.

Shaker screens are constructed with a hooked edge profile on wire cloth or wire mesh panel. They provide an essential function in the sizing, sifting, and grading process in various industries such as minerals, sand, and agriculture. Shaker screens work by vibrating the material to be screened. The vibration causes the material to move across the surface of the screen, separating one medium from another. This includes sizing larger items from smaller ones or solids control. The larger items are collected on the surface of the screen, while the smaller items pass through and are collected in a separate container. A shaker screen is typically made up of several layers of mesh or wire cloth arranged in a series of decks, with each deck having a progressively finer mesh size.

Vacuum degasser, or vacuum degasser rig, is a kind of drilling fluid degasser, which is the second phase of mud purification equipment in the drilling process. HYZCQ series Vacuum degasser is a new type of special equipment used to treat gas infiltrating drilling fluid, sometimes called mud degasser. It can quickly remove various gases invaded into the drilling fluid and plays an important role in restoring the specific gravity of the mud and stabilizing the performance of the mud. At the same time, the drilling fluid vacuum degasser rig can be used as a high-power agitator, which is suitable for all kinds of mud circulation purification systems.