Products

Our drilling fluid drying drying shaker is an efficient and reliable solid-liquid separation equipment, which is widely used in oil drilling, mining, chemical industry and other fields. The equipment adopts advanced vibration screening technology and efficient drying process, which can quickly and accurately separate solid particles from slurry, realize material recycling and greatly improve production efficiency.

Vacuum degasser, or vacuum degasser rig, is a kind of drilling fluid degasser, which is the second phase of mud purification equipment in the drilling process. HYZCQ series Vacuum degasser is a new type of special equipment used to treat gas infiltrating drilling fluid, sometimes called mud degasser. It can quickly remove various gases invaded into the drilling fluid and plays an important role in restoring the specific gravity of the mud and stabilizing the performance of the mud. At the same time, the drilling fluid vacuum degasser rig can be used as a high-power agitator, which is suitable for all kinds of mud circulation purification systems.

Drilling mud cleaner is the second and third stage solids control equipment for drilling mud, it’s a combination of shale shaker, desander cyclone, desilter cyclone into one equipment. HYANG mud cleaner has advantages to have a good performance shaker screen to screen out the over 1 mm particale the pump to the desander cyclone sifting through the cyclone nozzle to screen out the over 76um particle . Finally , pump to the Desilter cyclone to screen out the over 47um cyclone. It is an ideal choice for high-efficiency cleaner equipment for the solid phase separation of drilling mud.

HYZQJ series desander is an important equipment in drilling fluid solids control. Desander is made up of a desander cyclone and a simple shale shaker. It is a secondary solids control desander equipment for suspended drilling fluid treatment. The key part of the Desander is that the hydrocyclone is made of wear-resistant cast iron. It is mainly applicate to separate size 47～76um solid phase particles like the sand in the drilling fluid. 

The desilter is mainly composed of a shale shaker, a manifold, cyclones, etc. The desilter is a three-level solids control equipment used in the solid phase control system of the drilling fluid. Hyang desilter has a high separation capacity and a wide range of separation particle size. The bottom outflow of the cyclone is shaped like an umbrella "wet bottom" to discharge the sand so that the particles in the separation zone can be discharged quickly, reducing the probability of underflow orifice clogging.  The matched shale shaker has large processing capacity, low noise, and long screen life.

Decanter Centrifuge is the fourth phase solids control equipment, also called Horizontal Spiral Centrifuge, Horizontal Decanter Centrifuge and Screw Decanter Centrifuge etc. According to different rotating speed, it can be defined as middle speed, high speed and high speed VFD centrifuge. It is mainly use for recycling the barite, removing the fine solid particles sized in 2-7μm, controlling the density and viscosity of drilling fluid to keep the drilling fluid performance, Hyang provides the customized centrifuge.

Mud agitator is part of the drilling fluids solids control equipment, which is mainly used to agitate and mix the drilling mud to prevent solids particles from depositing in the circulating tank and to stabilize the performance of drilling fluids. HYJBQ series mud agitator is composed of explosion-proof motor, reducer, frame and wave wheel assembly. The motor drives the wave wheel to rotate through the reducer, generating a strong stirring force, so that the solid particles in the drilling fluid are fully dispersed and maintained in suspension.

Mud gun is a kind of equipment specially designed for drilling mud solid control system, mainly used to clean the residue in the mud tank, keep the tank clean, and extend its service life. Through high-pressure water flow or mud, the mud gun can effectively remove mud, solid particles, etc. adhering to the tank wall, ensuring the smooth operation of the drilling fluid solid control system.

The mud gas separator is designed for the solid control system of drilling fluid mud. Through efficient separation technology, the gas and liquid in drilling fluid are separated, effectively preventing the damage of gas to drilling equipment, and ensuring the safety and stability of drilling operations.
The gas enter drilling fluid from the liquid-gas separator enters the separator tangentially from the liquid inlet of the separator, and falls on a series of specially designed internal baffles along the inner wall, colliding, increasing the exposed surface area, and flowing downward, causing turbulent flow Separate the gas from the drilling fluid. The free gas is discharged through the gas outlet on the top of the tank. The length of the exhaust pipe is determined and equipped on site and led to a safe place. The degassed drilling fluid is discharged into the solid control tank.

Flare Ignition Device is a processing device for tail gas and vented natural gas from oilfield drilling, refinery and natural gas gathering and transportation stations. Flare Ignition Device can ignite vented combustible and harmful gas to eliminate its hazards to environment and safety, it’s a safety and environmental protection equipment. In addition to working with mud gas separator, it is also widely used in oil refineries and gas transmission stations. HYYPD series flare ignition device is composed of ignition torch, control box and portable ignition control box. HYANG flare ignition device ignites harmful combustible gas in an instant and accurately.

Jet mud mixing hopper is a kind of mud mixing hopper designed by Venturi principle. Also known as Venturi jet mixing hopper, its main composition includes nozzle, mixing chamber, venturi tube and hopper and butterfly valve, centrifugal pump or shear pump. Slurry jet mixing hopper is usually used in oil drilling solid control slurry jet, non-dig slurry mixing jet and so on. It is mainly used to configure drilling fluid, change drilling fluid density, viscosity, water loss, etc. It is one of the special oilfield equipment for heavy drilling fluid. The jet mud hopper is equipped with sand pump and pipeline, that is, the jet mixing device is composed.

Screw conveyor is widely used in food, chemical, building materials, mining and other industries, especially suitable for conveying powder, granular, small block and other materials. In the oil drilling industry, screw conveyors play an important role in drilling fluid waste treatment and cuttings transportation. It has good tightness, can effectively prevent material leakage, and has strong corrosion resistance, suitable for conveying corrosive materials.

The screw conveyor has horizontal, inclined and combined forms, which can be used with other transportation equipment to complete joint transportation, separate transportation, mixing, allocation, dehydration, composite, unloading and stacking. screw conveyor is used for waste treatment of drilling fluid and cuttings transport.