Products

The borehole slurry separation or the bored piling desander system is widely used in mining, metallurgy, building, to treat various industrial wastewater and mud recycling in water well, small borehole, pilling, pipe jacking ect. As the diffirent capacity of the mud flow we will give you diffirent solutions and if use the bigger tank or bigger desander to help you recycling the mud in your borehole. The mud separation system adopts three-stage or 2 stages screening design, which can effectively separate the solid phase particles from the liquid phase in the mud and realize the purpose of solid-liquid separation. The whole system is compact in structure, small in area and easy to operate, It is an ideal equipment for handling mud.

Horizontal Directional Drilling (HDD) mud recycling unit solutions
HY Provides a right and excellent no Dig mud recycling unit or trechless methods of mud cleaning  as per your requirements of the HDD working conditions to give your right methods and solution 
If a desander unit or choose the 250GPM,300GPM , 500GPM 1000GPM mud recycling unit.

Drill cuttings refer to the formation cuttings that are damaged by the drill bit during the drilling process and brought to the ground through the mud circulation system. It is the main waste in the drilling process, and its production is accompanied by waste drilling fluid. Drilling cuttings management also called drilling waste management is necessary because the hydrocarbons contained in sludge and drill cuttings are extremely harmful to the environment.

Cementing water Tank
A tank used for storing water that is used in the cementing process. This water is essential for mixing cement slurry and ensuring proper flow properties. Is specifically designed to hold water that has been used to wash down cementing equipment. This prevents cement residue from contaminating other systems or causing environmental issues.

Coal mining drilling technology affects drilling efficiency, quality, rock breaking, slag discharge, temporary support, permanent support and drilling deviation control, which are composed of each link of coal mining drilling, rock breaking is the foundation of drilling, efficient slag discharge is the premise, temporary support and permanent support is the safety guarantee of drilling, deviation control is the quality guarantee of drilling.

Solid control system is mainly the solid control and mud separation of petroleum drilling fluid, which can recycle and clean drilling fluid, also known as mud purification system. Suitable for the drilling process of 2000-15000 meters of oil Wells, the oil solid control system consists of 3 to 7 modular combination tanks.

The steel-wood foundation, also known as the rig mat, is a plate-like equipment composed of wood and steel, and is an outdoor ground decoration equipment similar to floor tiles. It enables drilling workers to perform operations in various complex geographical conditions. For example, when the ground is wet or the land is too unstable during the rainy season, a steel-wood foundation is installed under the land-based oil rig.

The screw pump is a positive displacement rotor pump, which relies on the volume change of the sealed cavity formed by the screw and the bushing to suck and discharge the liquid. According to the number of screws, screw pumps are divided into single screw pumps, double, three, and five screw pumps. The characteristics of the screw pump are stable flow, small pressure pulsation, self-priming ability, low noise, high efficiency, long life, and reliable operation. Its outstanding advantage is that it does not form a vortex when conveying the medium, and is not sensitive to the viscosity of the medium. Transport high-viscosity media. Screw pumps are mainly used as liquid supply pumps for centrifuges in the solids control industry, and both the underarm slurry pumps are ideal liquid supply pumps for centrifuges.

Drilling submersible slurry pump is mainly used to transport slurry to shale shaker and decanter centrifuge. It has a single-stage single-suction cantilever structure, with a bearing seat, fulcrum bearing and piping to connect to the pumping system. Fluid is discharged from the outlet pipe. HYANG YZ series submersible slurry pump is equipped with a semi-open impeller, the stirring paddle is located in the extended inlet area of impeller blades. 

The shear pump is a "new low-pressure homogenizing pump" also called "emulsifying pump". It is a sanitary pump with multiple functions such as dispersion, homogenization, emulsification and homogenization. The JQB series shear pump is a new type of equipment designed by Hyang to provide users with rapid configuration and mud processing, which can meet the requirements of users to configure high-performance mud. The HYJQB series shear pump can effectively mix and fully hydrate the materials added in the drilling fluid, save the use of mud materials, shorten the mud configuration time, and provide good mud performance for the drilling process. It is an ideal drilling fluid solids control equipment.

Centrifugal Pump is the ideal equipment to provide power transmission for desander, desilter, mud cleaner, and jet mud mixer. HYANG chooses high wear-resistant hard alloy for mechanical seal to make sure our equipment corrosion resistance and wear resistance. All the parts are interchangeable with internationally famous brand pumps like the Mission pump, so that users can find the vulnerable parts and replace them more conveniently.