Different Sizes Solid Control Desander Cyclones

Hyang desander desilter cones adopted 100% Polyurethane or abrasion resistant alloy material, and we use clamp design, ensuring long life and easy maintenance. it is the ideal products to match desander and desilter, and the sizes are vailable for 8", 10", 12", 14", and 20" desander cyclones. Hyang provides replacement for international brands like Derrick or Swaco.

Desander cyclones: 500GPM, separates solid-phase 45~75μm.

Desilter cyclones: 80 GPM, separates solid phase 15 ~45μm.

The basic principle of cyclone desander is to use centrifugal force to introduce fluid tangentially into the conical shell of the desander cyclone, and the action of gravity pushes the solid phase to the cone surface and runs down the surface to the separator for discharge mouth discharge. The secondary liquid swirl action generated in the separator shell will generate upward movement force, and then the liquid will be discharged from the discharge manifold through the swirl detector. The smaller diameter of the sand removal cyclone is, the greater the separation effect will be so that solid particles with smaller particle sizes can be successfully separated.

As a professional manufacturer of desander, HYANG can supply 8", 10", 12", 14", and 20" desander cyclones. Our desander cyclones are available for different materials, such as ceramic cyclones, polyurethane cyclones, cast iron cyclones, etc. Our desander hydrocyclones are effective on both oil-base and water-base weighted and unweighted drilling fluid systems, it’s widely used in oil and gas drilling solids control systems, horizontal directional drilling mud cyclones, and shield muddy water separation cyclone treatment.